MeterMall USA - Data Loggers / All Products

UA-002-64 HOBO Pendant® Temperature/Light Data Logger 64K

Thu, 21 Aug 2014 05:59:00 GMT

UA-002-64 HOBO Pendant® Temperature/Light Data Logger 64K
Buy Now: $119.00

This HOBO Pendant® logger is a miniature, waterproof two-channel temperature and relative light level data logger. The 64K model comes at a great value and is suitable for indoor, outdoor, and underwater applications. Model UA-002-08 holds approximately 3,500 time-date-stamped temperature and light readings or events, while sister model UA-002-64 can store approximately 28,000. Use a solar radiation shield for accurate temperature measurement in sunlight. See RS1 Solar Radiation Shield (assembly required) and M-RSA (pre-assembled) Solar Radiation Shield. Note that using a solar radition shield prevents the use of the light sensor.

Low-cost temperature with alarm indication or light intensity
Waterproof housing for wet or underwater use
Data readout in less than 30 seconds via fast Optic USB interface

Environment:
The UA-002-64 Data Logger is for use in Indoor , Outdoor and Underwater environments

Measurements:
The UA-002-64 Data Logger supports the following measurements:

Temperature, Light Intensity, Water Temp

Documentation: UA-002-64 HOBO Pendant® Temperature Logger 8K User Manual

>Print Specifications

>Data Sheet

> View all Pendant loggers

IMPORTANT: This HOBO data logger requires HOBOware software and a communications device. See Related Items below

Visit Data Loggers to see additional products in this category.

BASE-U-4 Optic USB Base Station

Wed, 20 Aug 2014 07:09:00 GMT

BASE-U-4 Optic USB Base Station
Buy Now: $150.00

The Universal Optic USB Base Station and couplers are used to offload data from any HOBO® data logger with an Optic USB interface. The splash-resistant Optic USB Base Station connects to your computer via USB, while connecting to the logger via an appropriate coupler. This is compatible with the HOBO UA, U20, U22, U23, UTBI, U24 & U26 series.

NOTE: Couplers for all compatible loggers are included with the BASE-U-4. Couplers are included for compatibility with six of our most popular logger types including: UA Pendants, U20 water level loggers, the U22 Water Temp Pro v2, our UTBI TidbiT, U24 Conductivity and U23 loggers.

BASE-U-4 Optic Base Station User Manual

Visit Data Loggers to see additional products in this category.

CSV-A8 AC Current Switch Sensor

Mon, 18 Aug 2014 10:33:00 GMT

CSV-A8 AC Current Switch Sensor
Buy Now: $89.00

Measure run-time (time-of-use) of equipment with the CSV-A8 split-core AC current sensor alogn with a compatible HOBO Data Logger. This UL-listed sensor has built-in on/off status lights and provides an adjustable current threshold of .5 to 175 amps. Simply install the sensor around a current-carrying wire to the equipment to be monitored and then connect the sensor to a compatible UX90 or UX120 data logger.

Can be used with any state channel on UX-120-xxxx, U9-001 or U11-001 loggers
Installs around a current-carrying wire to provide a relay signal indications equipment on/off
Adjustable threshold provides maximum application flexibility
UL listed

Environment:
The CSV-A8 Sensor is for use in Indoor environments

Measurements:
The CSV-A8 Sensor supports the following measurements: Motor On/Off

Documentation: CSV-A8 AC Current Switch Sensor

Visit Data Loggers to see additional products in this category.

T-ION-TVOC Volatile Organic Compound (VOC) Sensor

Sat, 16 Aug 2014 00:09:00 GMT

T-ION-TVOC Volatile Organic Compound (VOC) Sensor
Buy Now: $3,995.00

Dependably measure volatile organic compounds with the TVOC sensor. With the deployment of a fixed continuous monitor, users can avoid dangers by monitoring areas in question. A variety of industries use the TVOC to minimize poisoning and explosions.

Requires analog port selection during U30 system configuration and use of a S-FS-CVIA when using the H22-001 logger. When using a U12 logger or ZW series data loggers, this sensor requires a 4-20mA input cable (CABLE-4-20mA) and external power provided by an AC adapter (AC-SENS-1).

View Ion Science's TVOC manual

Intrinsically Safe for use in hazardous areas

Environment:
The T-ION-TVOC Sensor is for use in Indoor environments

Measurements:
The T-ION-TVOC Sensor supports the following measurements: Volatile Organic Compound

Documents:

T-ION-TVOC Volatile Organic Compound (VOC) Sensor

Visit Data Loggers to see additional products in this category.

AC-SENS-1 A/C Power Adapter

Fri, 15 Aug 2014 11:52:00 GMT

AC-SENS-1 A/C Power Adapter
Buy Now: $39.00

The AC-SENS-1 is an AC power adapter that provides DC power to sensors that require it. This expands the range of 3rd party sensors that can be used with Onset's HOBO U12, HOBO U30, and HOBO ZW series products.

Input: 100-240VAC @ 50/60Hz 0.2A
Output: 12VDC @ 0.5A

Specifications:

Input: 100-240VAC @ 50/60Hz 0.2A
Output: 12VDC @ 0.5A

Visit Data Loggers to see additional products in this category.

CTV-E 620- 600 Amp Split-core AC Current Sensor

Thu, 14 Aug 2014 18:48:00 GMT

CTV-E 620- 600 Amp Split-core AC Current Sensor
Buy Now: $175.00

A split-core AC current sensor responsive over the range of 60 to 600 amps AC for use with U12, UX120 and ZW data loggers with external input channels. With an input current of AC current, sine wave, single phase 50 Hz or 60 Hz, load power factor 0.5 to 1.0 lead or lag.

The molded-plastic housing is rated for indoor use per UL508.

UL listed
Sensor power induced from line voltage
Self-gripping split-core design for fast installation

Environment:
The CTV-E Sensor is for use in Indoor environments

Measurements:
The CTV-E Sensor supports the following measurements: AC Current

Documentation: CTV-E 60 - 600 Amp split-core AC current sensor

Visit Data Loggers to see additional products in this category.

CTV-D 20- 200 Amp Split-core AC Current Sensor

Thu, 14 Aug 2014 18:44:00 GMT

CTV-D 20- 200 Amp Split-core AC Current Sensor
Buy Now: $175.00

A split-core AC current sensor responsive over the range of 20 to 200 amps AC for use with U12, UX120 and ZW data loggers with external input channels. With an input current of AC current, sine wave, single phase 50 Hz or 60 Hz, load power factor 0.5 to 1.0 lead or lag.

The molded-plastic housing is rated for indoor use per UL508.

UL listed
Sensor power induced from line voltage
Self-gripping split-core design for fast installation

Environment:
The CTV-D Sensor is for use in Indoor environments

Measurements:
The CTV-D Sensor supports the following measurements: AC Current

Documentation: CTV-D 20 - 200 Amp split-core AC current sensor

Visit Data Loggers to see additional products in this category.

CTV-C 10- 100 Amp Split-core AC Current Sensor

Thu, 14 Aug 2014 18:38:00 GMT

CTV-C 10- 100 Amp Split-core AC Current Sensor
Buy Now: $145.00

A split-core AC current sensor responsive over the range of 10 to 100 amps AC for use with U12, UX120 and ZW data loggers with external input channels. With an input current of AC current, sine wave, single phase 50 Hz or 60 Hz, load power factor 0.5 to 1.0 lead or lag.

The molded-plastic housing is rated for indoor use per UL508.

UL listed
Sensor power induced from line voltage
Self-gripping split-core design for fast installation

Environment:
The CTV-C Sensor is for use in Indoor environments

Measurements:
The CTV-C Sensor supports the following measurements: AC Current

Documentation: CTV-C 10- 100 Amp split-core AC current sensor

Visit Data Loggers to see additional products in this category.

CTV-B 5 - 50 Amp Split-core AC Current Sensor

Thu, 14 Aug 2014 18:33:00 GMT

CTV-B 5 - 50 Amp Split-core AC Current Sensor
Buy Now: $145.00

A split-core AC current sensor responsive over the range of 5 to 50 amps AC for use with U12, UX120 and ZW data loggers with external input channels. With an input current of AC current, sine wave, single phase 50 Hz or 60 Hz, load power factor 0.5 to 1.0 lead or lag.

The molded-plastic housing is rated for indoor use per UL508.

UL listed
Sensor power induced from line voltage
Self-gripping split-core design for fast installation

Environment:
The CTV-B Sensor is for use in Indoor environments

Measurements:
The CTV-B Sensor supports the following measurements: AC Current

Documentation: CTV-B 5 - 50 Amp split-core AC current sensor

Visit Data Loggers to see additional products in this category.

CTV-A 2 - 20 Amp split-core AC current sensor

Thu, 14 Aug 2014 17:59:00 GMT

CTV-A 2 - 20 Amp split-core AC current sensor
Buy Now: $145.00

A split-core AC current sensor responsive over the range of 2 to 20 amps AC for use with U12, UX120 and ZW data loggers with external input channels. With an input current of AC current, sine wave, single phase 50 Hz or 60 Hz, load power factor 0.5 to 1.0 lead or lag.

The molded-plastic housing is rated for indoor use per UL508.

UL listed
Sensor power induced from line voltage
Self-gripping split-core design for fast installation

Environment:
The CTV-A Sensor is for use in Indoor environments

Measurements:
The CTV-A Sensor supports the following measurements: AC Current

Documentation: CTV-A 2 - 20 Amp split-core AC current sensor

Visit Data Loggers to see additional products in this category.