The HOBO Waterproof Shuttle provides convenient readout and
relaunching of underwater and outdoor HOBO loggers with an Optic
USB interface, and is waterproof to 20m (66ft). The HOBO Waterproof
Shuttle can also be used as a base station.
NOTE: Couplers are included for compatibility
with five of our most popular logger types including: UA Pendants,
U20 water level loggers, the U22 Water Temp Pro v2, our UTBI
TidbiT, U24 Conductivity and U23 loggers.
NOTE: HOBOware Pro software required.
The U-DTW-1 is for use in Indoor , Outdoor and Underwater
U-DTW-1 HOBO® Waterproof Shuttle User Manual
Compatibility: All HOBO U-Series loggers with optic USB.
Not compatible with the HOBO U-Shuttle (U-DT-1).
Requirements: HOBOware 2.2+
Compatible logger and matching coupler
- For UA Pendant (Part # COUPLER2-A)
- For U20 Water Level (Part # COUPLER2-B)
- For U22 Water Temp Pro v2 (Part # COUPLER2-C)
- For UTBI TidbiT v2 (Part # COUPLER2-D)
- For U23 HOBO Pro v2 (Part # COUPLER2-E)
Data capacity: 63 logger readouts of up to 64K each
Operating temperature: 0° to 50°C (32° to 122°F)
Storage temperature: -20° to 50°C (-4° to 122°F)
Wetted materials: Polycarbonate case, EPDM o-rings and
Waterproof: To 20 m (66 feet)
Time accuracy ± 1 minute per month at 25°C (77°F)
Logger-to-shuttle transfer speed: Reads out one full 64K logger in
about 30 seconds
Shuttle-to-host transfer speed: Full shuttle offload (4 MB) to host
computer in 10 to 20 minutes, depending on computer
Batteries: 2 AA alkaline batteries required for remote
Battery life: One year or at least 50 complete memory fills,
Weight: 150 g (4 oz)
Dimensions: 15.2 x 4.8 cm (6.0 x 1.9 inches)
The CE Marking identifies this product as complying with the
relevant directives in the European Union (EU).
MeterMall Shopping Cart
is currently empty