Measurements: Actual
Conductivity, Temperature, Specific Conductance at 25C (calculated),
Salinity (calculated using PSS-78, the Practical Salinity Scale 1978)
Conductivity Measurement Range: (Calibrated Range)
High Range: 5000 to 55,000 uS/cm
Low Range: 100 to 10,000 uS/cm
Over the range of 5 to 35C (41 to 95F)
Temperature Measurement Range: 5 to 35C (41 to 95F)
Specific Conductance Accuracy: (in Calibrated Range using Conductivity Assistant and Calibration Measurements)
Low Range: 3% of reading or 50 µS/cm, whichever is greater
High Range: 5% of reading, in waters within a range of
±3,000 µS/cm; waters with greater variation can have substantially greater error
Resolution:
Conductivity: 2 uS/cm
Temperature: 0.01°C (typical 0.02°F)
Conductivity Drift:
Up to 12% sensor drift per month, exclusive of drift from fouling.
Monthly start- and end-point calibration should be used with the
HOBOware Conductivity Assistant to achieve the specified Specific
Conductance accuracy.
Response time: 1 second to 90% of change (in water)
Operating Range: -2 to 36C (28 to 97F) – non-freezing
Memory: 18,500 temperature and conductivity
measurements when using one conductivity range; 14,400 sets of
measurements when using both conductivity ranges (64kbytes)
Sample rate: 1 second to 18 hrs, fixed or multiple-rate sampling with up to 8 user-defined sampling intervals
Clock accuracy: +/- 1 minute per month
Battery life: 3 years (@ 1 min logging)
Maximum Depth: 70 m (225')
Weight: 193 gm (6.82 ounces), buoyancy in freshwater: -59.8 gm (-2.11 ounces)
Size: 3.18 cm diameter x 16.5 cm, with 6.3 mm mounting hole (1.25" diameter x 6.5", ¼" hole)
Wetted Housing Materials: Delrin housing, epoxy,
stainless steel retaining ring, polypropylene, Buna rubber O-ring,
titanium pentoxide (inert coating over sensor) – all materials are
suitable for long-term use in saltwater.
CE Compliance: The CE Marking identifies this product as complying with all relevant directives in the European Union (EU).
